Variious methods of axial displacement and load can be supplied. All devices comply with the accuracy specified in BS 1377, ASTM D2850, D4767. All transducers are supplied with a calibration certificate

S-Type Load Cell 10 kN.for Triaxial Tests. Fitted with 5 Pin Din Plug.

•Repeatability better than ± 0.02% of rated output
•Non-Linearity better than ± 0.03% of rated output
•Supplied complete with 5-pin DIN type connector for connection to GDU

Ideally suited for a wide range of applications, ELE S-type load cells provide high accuracy and minimum deformation. Various models are available, with the necessary adaptors, for use with ELE Triaxial Load Frames, Multiplex 50/Marshall Test 50/CBR Test 50 and Direct Shear machine.

info »
27-1553

S-Type Load Cell 25 kN.for Triaxial Tests. 27-1293 required separately.

•Repeatability better than ± 0.02% of rated output
•Non-Linearity better than ± 0.03% of rated output
•Supplied complete with 5-pin DIN type connector for connection to GDU

Ideally suited for a wide range of applications, ELE S-type load cells provide high accuracy and minimum deformation. Various models are available, with the necessary adaptors, for use with ELE Triaxial Load Frames, Multiplex 50/Marshall Test 50/CBR Test 50 and Direct Shear machine.

info »
27-1555

Submersible Load Transducer Assembly 10kN Capacity In Compression.

•Eliminates effects of piston friction on readings
•Unaffected by cell confining pressures
•Easily installed in triaxial cell
•Supplied complete with calibration certificate and 5-pin DIN type connector for use with GDU

Submersible Load Transducers are used to measure accurately the axial loads applied to triaxial test specimens. Consisting of a load cell and piston assembly these units replace the standard triaxial cell loading piston. A major advantage is that these transducers measure loads directly on top of the specimen. All transducers are supplied complete with a 5-pin DIN type connector and calibration certificate.

info »
27-1575

Clamped Boss Load Ring - 4.5 kN

info »
78-0260

S-Type Load Cell 5 kN.for Triaxial Tests. Fitted with 5 Pin Din Plug.

•Repeatability better than ± 0.02% of rated output
•Non-Linearity better than ± 0.03% of rated output
•Supplied complete with 5-pin DIN type connector for connection to GDU

Ideally suited for a wide range of applications, ELE S-type load cells provide high accuracy and minimum deformation. Various models are available, with the necessary adaptors, for use with ELE Triaxial Load Frames, Multiplex 50/Marshall Test 50/CBR Test 50 and Direct Shear machine.

info »
27-1551

Submersible Load Transducer Assembly 5kN Capacity In Compression.

•Eliminates effects of piston friction on readings
•Unaffected by cell confining pressures
•Easily installed in triaxial cell
•Supplied complete with calibration certificate and 5-pin DIN type connector for use with GDU

Submersible Load Transducers are used to measure accurately the axial loads applied to triaxial test specimens. Consisting of a load cell and piston assembly these units replace the standard triaxial cell loading piston. A major advantage is that these transducers measure loads directly on top of the specimen. All transducers are supplied complete with a 5-pin DIN type connector and calibration certificate.

info »
27-1573

Distance Piece Stainless Steel for Use with Submerisble Load Cells and Axial Strain Transducers.

Required when using submersible load cells.

info »
27-1293

50kN Clamped Boss Load Ring

Calibrated in compression.

info »
78-0860

Clamped Boss Load Ring - 28.0 kN

info »
78-0760