45-6810/01
Category:
Design and Testing of Bituminous Mixtures
Sub Category:
Marshall Stability and Flow
Product Group:
Marshall Load Frames
• Geared screwjack and motor drive
• Precise speed
• Internal limit switch for both directions of travel
• Easy to use controls
This bench-mounting mechanical load frame is ruggedly constructed to encompass the strain and loads involved with the test. The unit is compact in size and can be quickly installed on a bench top, requiring only a power point. It has been designed for simple operation, is easy to clean and requires minimal maintenance.
**Not available for sale in the USA**
Load frame, 50 kN capacity. Supplied without Breaking Head. For 220 – 240 V AC, 50 Hz, 1 ph.
| Marshall stability and flow | Yes |
| Power Supply | 220 - 240 V AC, 50 Hz, 1 ph |
| EN 12697-34 | Yes |
| ASTM D6927-15 | Yes |
| EN 12697-23 | Yes |
| BS 598-107 | Yes |
| ASTM D6927 | Yes |
| ASTM D6931 | Yes |
47-0202/10
s built with a t-shaped polyethylene handle and has a maximum tip temperature of 250°c and a 300 mm long probe.
45-6550/01
rforated shelf. Temperature range ambient to 60°C ± 5°C.
27-1559
0 V AC/DC with an output of 2.7 mV/V nominal. Aluminium alloy and Stainless Steel construction with IP65 environmental protection. Fitted with 5-pin DIN plug.
47-0202
Comprises a hand-held digital thermometer with an operating range of -99 to +1372 °C with a switchable resolution between 0.1 and 1.0 °C. Operates on a 9V battery and utilises K-type thermocouple sensors.
23-4200
Adaptor plates will be supplied; extrudes samples from BS Compaction Mould, Proctor Mould 100 mm, Core Cutter and Marshall Mould. Maximum extrusion force 20kn.
