< Previous210Aggregatestel: +44 (0)1525 249 200 • email: ele@eleint.co.uk • www.ele.com210Mechanical PropertiesAggregate Impact Value (AIV)The apparatus has been designed in a particularly heavy duty form, with specially hardened steel surfaces for minimum wear. The assembly is heavily plated to ensure corrosion resistance and forms a rigid frame around the quick-release trigger mechanism, which ensures an effective free fall of the hammer when released. A built-in counter automatically indicates the number of blows delivered. The apparatus is supplied complete with cylindrical measure 75 mm diameter x 50 mm deep, and a steel tamping rod 16 mm diameter x 600 mm long.Aggregate Impact Value ApparatusProduct Code: 42-4005Product Standards:BS 812-112Heavy duty construction, heavily plated assembly ensures corrosion resistance.SpecificationsL x W x H (mm)500 x 300 x 980Los Angeles Abrasion Machine ±European and ASTM methods. ±Revolution counter. ±Safety cut-out. ±Full width cover.The Los Angeles Machine comprises a heavy steel cylinder, rotated about its horizontal axis. The cylinder incorporates a removable internal shelf, as specified in the ASTM and EN test methods. The steel cylinder is manufactured from structural steel plate conforming to S275 of EN 10025:1993.The filling aperture is provided with a cover and a safety stop button is prominently positioned. The machine is fitted with a revolution counter and steel tray for specimen unloading. Supplied without abrasive charges which should be ordered separately.Los Angeles Abrasion Machine with CE Safety Cabinet fitted with MicroswitchesProduct Codes: 42-5310/01, 42-5310/06Product Standards:EN 1097-2, ASTM C131, ASTM C535, AASHTO T96, NF P18-573The machine consists of a closed hollow cylindrical steel drum rotating around its horizontal axis on ball bearing units mounted on a sturdy base framework. The full enclosure ensures noise is minimized. The drum is driven at a speed of between 30 to 33 rpm via an enclosed belt drive arrangement from an electric motor/gearbox unit situated on the base frame. Inside the drum a full length steel shelf is attached, accessed by a dust-proof opening. The cylinder incorporates a removable internal shelf, one shelf position is provided to meet the requirements of both the ASTM and EN test standards. Controls are located easily on the right-hand side of the machine at convenient operator height. Start and stop push buttons and a subtracting revolution counter allows the user to preset the number of revolutions before an automatic stop.SpecificationsPower Supply42-5310/01220-240 V AC, 50 Hz, 1 ph42-5310/06220-240 V AC, 60 Hz, 1 ph211Aggregateswww.ele.com • email: ele@eleint.co.uk • tel: +44 (0)1525 249 200211Mechanical PropertiesLos Angeles Abrasion Machine Meets ASTM and European StandardsProduct Code: 42-5315/01, 42-5315/06Product Standards:EN 1097-2, ASTM C131, ASTM C535, AASHTO T96, NF P18-573SpecificationsMotor1 hpCapacity5,000 g each of aggregate and chargeDrum Speed (rpm)30 to 33FrameWelded structural steelCounterAdjustable; automatic shut-off; push-button reset and adjustmentControlsMagnetic motor starter with overload protection and integral on/off switchesDimensions W x D x H38.6 x 36.2 x 38.6 inches 980 x 920 x 980 mmWeightNet 882 lbs (400 kg)Power Supply42-5315/01220-240 V AC, 50 Hz, 1 ph42-5315/06220-240 V AC, 60 Hz, 1 phAbrasive Charge Set of 12 (EN)Product Code: 42-5305/10Product Standards:EN 1097-2, ASTM C131, ASTM C535 Set of 12.Abrasive Charges Set of 12 (ASTM)Product Code: 42-5300/10Product Standards:EN 1097-2, ASTM C131, ASTM C535, AASHTO T96Set of 12.SpecificationsWeight (lbs)11.3212Aggregatestel: +44 (0)1525 249 200 • email: ele@eleint.co.uk • www.ele.com212Mechanical PropertiesSkid Resistance TestingThe Pendulum Skid Resistance Tester was originally designed in the 1940s in the USA, and further developed in the 1960s at the TRL (Transport Research Laboratory) for the testing of road surfaces. The device measures the frictional resistance between a rubber slider mounted on the end of a pendulum arm and the surface to be tested. This provides road engineers with a method of checking the resistance of wet and dry surfaces to slipping and skidding, both in the laboratory and in-situ. It operates by a pendulum rotating about a spindle which is attached to a vertical pillar. At the end of the tubular arm, a head of known mass is fitted with a rubber slider. The pendulum is released from a horizontal position so that it strikes the sample surface at a constant speed. The distance travelled by the head after hitting the sample is determined by the friction of the sample surface. Pendulum Skid Resistance TesterProduct Code: 42-6000Product Standards:EN 1097-8:2009, EN 1436:1997, EN 13036-4:2003, ASTM E303-93, BS 812 Pt 114, BS 6077 Pt 1, BS 7044, BS 7188, BS 8204, BS 7976Further Information:Applications: ±Assessment of surface friction and skid resistance properties. ±Testing of aggregates in the PSV (Polished Stone Value) test. ±Testing of new road surface materials. ±Testing of pedestrian pavements. ±RTA (road traffic accidents). ±Litigation investigationsFeatures: ±Designed for laboratory and on-site road surface testing. ±Factory calibrated to EN 1097-8. ±Low friction arm and lightweight pointer. ±Supplied with ‘F’ scale for use with small slider set for 76 mm slide length (PSV test). ±Highly repeatable. ±Supplied with carrying case and tool kit.SpecificationsDimensions W x D x H (mm)695 x 295 x 695Volume (m³)0.15Weight (kg)30Spreader Feet for Skid Resistance Tester for In-situ Testing. Set of 3Product Code: 42-6000/10Skid Resistance Tester Base Plate for Laboratory TestingProduct Code: 42-6200Rubber Mounted PSV SliderSlider for polished stones for use with Pendulum Skid Resistance Tester (42-6000)Product CodeProduct Description42-6000/111.25” Rubber Mounted PSV Slider42-6000/123” Rubber Mounted TRL (55) Slider42-6000/133” Rubber Mounted Four S (96) Slider42-6000/143” Rubber Mounted CEN Slider42-6000/15First Traceable Calibration for Pendulum Skid Resistance Tester213Aggregateswww.ele.com • email: ele@eleint.co.uk • tel: +44 (0)1525 249 200Buyer’s GuideSampling & Preparation Equipment for AggregatesProduct CodeProductQty23-3200Riffle Box 38 mm Slot Width complete with Three Containers123-3350Riffle Box 64 mm Slot Width complete with Three Containers181-0220Aluminium Scoop Large181-0240Shovel (Flat)181-3060Sample Container 10 ltr capacity1081-4160Sample Tray 910 x 910 x 76 mm181-4765Polythene Bag 254 x 380 mm, Pack of 10010081-4775Polythene Bag 450 mm x 1 m x 1000 g Priced each100Determination of Moisture Content (Oven-Drying) MethodStandard(s)EN 1097-5, BS 812-109This is the definitive method for the determination of water content of aggregates drying in a ventilated oven.Product CodeProductQty78-1320/01Drying Oven 220 ltr capacity, Fan-Circulated, complete with 4 Shelves and 1 Year Warranty178-6020/016 kg x 0.1 g Balance178-6040/0130 kg x 1 g Balance181-0120Spatula 150 x 25 mm281-0222Aggregate Scoop with two handles 250 mm long x 125 mm dia, 5 kg capacity181-3040Sample Container. 2.5 ltr capacity1081-354522 ltr Transport/Storage Container complete with Snap-on Lid and Handle581-4020Sample Tray 306 x 306 x 38 mm682-2110Desiccator Cabinet Non-Vacuum182-7091Silica Gel 6-16 Mesh Quantity 500 g1Determination of Moisture Content, Modified High Temperature Drying MethodThis is an alternative test method to the Oven Dry method. Results from this test method should be checked using the Oven Method.Standard(s)BS 812-109Product CodeProductQty78-3104/01Hotplate Digital Temperature Indication 0 to 300ºC 300 x 500 mm heating area 220-240 V AC, 50 Hz, 1 ph.178-6020/016 kg x 0.1 g Balance181-0140Spatula 200 mm Blade181-4700Stainless Steel Tray 305 mm dia1214Buyer’s GuideAggregatesDetermination of Particle Size DistributionThis test method determines the particle size distribution of aggregates using test sieves.The test method is suitable for natural or artificial aggregates, including lightweight aggregates up to 63 mm nominal size but excluding filler.Standard(s)EN 933-1, BS 812-103Product CodeProductQty78-1320/01Drying Oven 220 ltr capacity, Fan-Circulated, complete with 4 Shelves and 1 Year Warranty178-6000/01200 g x 0.001 g Balance178-6020/016 kg x 0.1 g Balance178-6040/0130 kg x 1 g Balance179-0010200 mm dia Lid179-0020200 mm dia Receiver179-0070200 mm dia BS Sieve 63 Mic Stainless Steel Mesh179-0110200 mm dia BS Sieve 125 Mic Stainless Steel Mesh179-0150200 mm dia BS Sieve 250 Mic Stainless Steel Mesh179-0190200 mm dia BS Sieve 500 Mic Stainless Steel Mesh179-0230200 mm dia BS Sieve 1 mm Stainless Steel Mesh179-0270200 mm dia BS Sieve 2 mm Stainless Steel Mesh179-1500200 mm dia BS Sieve 4 mm Perforated Plate179-1540200 mm dia BS Sieve 8 mm Perforated Plate179-2010300 mm dia Lid179-2020300 mm dia Receiver179-2580300 mm dia BS Sieve 16 mm Perforated Plate179-2630300 mm dia BS Sieve 31.5 mm Perforated Plate179-2670300 mm dia BS Sieve 63 mm Perforated Plate179-2710300 mm dia BS Sieve 125 mm Perforated Plate179-7210Sieve Brush Double-Ended Nylon380-0200/01ELE Sieve Shaker complete with separate Control Panel, 220-240 V AC, 50 Hz, 1 ph181-4030Sample Tray 406 x 406 x 50 mm4tel: +44 (0)1525 249 200 • email: ele@eleint.co.uk • www.ele.com215Buyer’s GuideAggregatesDetermination of Flakiness and ElongationThe flakiness index of an aggregate sample is found by separating the flaky particles and expressing their mass as a percentage of the mass of the sample tested.This test method is not applicable to material passing a 6.3 mm sieve or retained on a 63 mm sieve.Standard(s)BS 812-105Product CodeProductQty42-0410Flakiness Gauge142-0600Set of Flakiness Sieves comprising 1 each 4.9 mm, 7.2 mm, 10.2 mm ,14.4 mm, 19.7 mm 26.3 mm and 33.9 mm142-0820Length Gauge178-1320/01Drying Oven 220 ltr capacity, Fan-Circulated, complete with 4 Shelves and 1 Year Warranty178-6020/016 kg x 0.1 g Balance178-6030/01Electronic Top Loading Balance 15 kg x 1g179-2010300 mm dia Lid179-2020300 mm dia Receiver179-2525300 mm dia BS Sieve 6.3 mm Perforated Plate179-2555300 mm dia BS Sieve 10 mm Perforated Plate179-2575300 mm dia BS Sieve 14 mm Perforated Plate179-2595300 mm dia BS Sieve 20 mm Perforated Plate179-2615300 mm dia BS Sieve 28 mm Perforated Plate179-2640300 mm dia BS Sieve 37.5 mm Perforated Plate179-2655300 mm dia BS Sieve 50 mm Perforated Plate179-2670300 mm dia BS Sieve 63 mm Perforated Plate180-0200/01ELE Sieve Shaker complete with separate Control Panel, 220-240 V AC, 50 Hz, 1 ph181-0240Shovel (Flat)181-4030Sample Tray 406 x 406 x 50 mm481-4230Sample Tray 1200 x 1160 x 50 mm1www.ele.com • email: ele@eleint.co.uk • tel: +44 (0)1525 249 200216Buyer’s GuideAggregatestel: +44 (0)1525 249 200 • email: ele@eleint.co.uk • www.ele.comDetermination of Flakiness This test method determines the flakiness index of aggregate and is suitable for natural or artificial aggregates, including lightweight aggregates.The test procedure is not suitable for particle sizes less than 4 mm or greater than 80 mm.Standard(s)EN 933-3Product CodeProductQty42-0300Grid Sieve 2.5 mm Slot Width for EN Aggregate Flakiness Test142-0302Grid Sieve 3.15 mm Slot Width for EN Aggregate Flakiness Test142-0304Grid Sieve 4 mm Slot Width for EN Aggregate Flakiness Test142-0306Grid Sieve 5 mm Slot Width for EN Aggregate Flakiness Test142-0308Grid Sieve 6.3 mm Slot Width for EN Aggregate Flakiness Test142-0310Grid Sieve 8 mm Slot Width for EN Aggregate Flakiness Test142-0314Grid Sieve 10 mm Slot Width for EN Aggregate Flakiness Test142-0316Grid Sieve 12.5 mm Slot Width for EN Aggregate Flakiness Test142-0318Grid Sieve 16 mm Slot Width for EN Aggregate Flakiness Test142-0320Grid Sieve 20 mm Slot Width for EN Aggregate Flakiness Test142-0322Grid Sieve 25 mm Slot Width for EN Aggregate Flakiness Test142-0324Grid Sieve 31.5 mm Slot Width for EN Aggregate Flakiness Test142-0326Grid Sieve 40 mm Slot Width for EN Aggregate Flakiness Test178-1320/01Drying Oven 220 ltr capacity, Fan-Circulated, complete with 4 Shelves and 1 Year Warranty178-6030/01Electronic Top Loading Balance 15 kg x 1g179-2010300 mm dia Lid179-2020300 mm dia Receiver179-2500300 mm dia BS Sieve 4 mm Perforated Plate179-2515300 mm dia BS Sieve 5 mm Perforated Plate179-2525300 mm dia BS Sieve 6.3 mm Perforated Plate179-2540300 mm dia BS Sieve 8 mm Perforated Plate179-2555300 mm dia BS Sieve 10 mm Perforated Plate179-2565300 mm dia BS Sieve 12.5 mm179-2580300 mm dia BS Sieve 16 mm Perforated Plate179-2595300 mm dia BS Sieve 20 mm Perforated Plate179-2605300 mm dia BS Sieve 25 mm Perforated Plate179-2630300 mm dia BS Sieve 31.5 mm Perforated Plate179-2645300 mm dia BS Sieve 40 mm179-2655300 mm dia BS Sieve 50 mm Perforated Plat.179-2670300 mm dia BS Sieve 63 mm Perforated Plate179-2684300 mm dia BS Sieve 80 mm Perforated Plate181-4030Sample Tray 406 x 406 x 50 mm4217Buyer’s GuideAggregateswww.ele.com • email: ele@eleint.co.uk • tel: +44 (0)1525 249 200Determination of the Shape Index of AggregateThis test method determines the shape index of coarse aggregate. It is suitable for aggregates of natural or artificial origin including lightweight aggregates.The test procedure is not suitable for particle sizes less than 4 mm or greater than 63 mm.Standard(s)EN 933-4Product CodeProductQty42-08213.1 Shape Index Caliper178-1320/01Drying Oven 220 ltr capacity, Fan-Circulated, complete with 4 Shelves and 1 Year Warranty178-6020/016 kg x 0.1 g Balance178-6040/0130 kg at 1 g Balance181-4030Sample Tray 406 x 406 x 50 mm4Also required79-0010200 mm dia Lid179-0020200 mm dia Receiver179-0070200 mm dia BS Sieve 63 Mic Stainless Steel Mesh179-0110200 mm dia BS Sieve 125 Mic Stainless Steel Mesh179-0150200 mm dia BS Sieve 250 Mic Stainless Steel Mesh179-0190200 mm dia BS Sieve 500 Mic Stainless Steel Mesh179-0230200 mm dia BS Sieve 1 mm Stainless Steel Mesh179-0270200 mm dia BS Sieve 2 mm Stainless Steel Mesh179-1500200 mm dia BS Sieve 4 mm Perforated Plate179-1540200 mm dia BS Sieve 8 mm Perforated Plate179-2010300 mm dia Lid179-2020300 mm dia Receiver179-2580300 mm dia BS Sieve 16 mm Perforated Plate179-2630300 mm dia BS Sieve 31.5 mm Perforated Plate179-2670300 mm dia BS Sieve 63 mm Perforated Plate179-2710300 mm dia BS Sieve 125 mm Perforated Plate179-7210Sieve Brush Double-Ended Nylon380-0200/01ELE Sieve Shaker complete with separate Control Panel, 220-240 V AC, 50 Hz, 1ph1218Buyer’s GuideAggregatestel: +44 (0)1525 249 200 • email: ele@eleint.co.uk • www.ele.comParticle Density & Water Absorption of AggregateThis test method is used for the determination of particle density and water absorption of aggregate between 63 mm and 5 mm.Standard(s)BS 812-2, EN 1097-6Product CodeProductQty42-1000/01Buoyancy Balance 6 kg x 0.1g, complete with Support Frame Water Tank and Suspension Hook142-1005Wire Basket Brass with Handle nominal 6000 cm3 capacity with 1.7 mm Wire Mesh178-1320/01Drying Oven 220 ltr capacity, Fan-Circulated, complete with 4 Shelves and 1 Year Warranty181-0518Timer Clock181-3060Sample Container 10 ltr capacity381-4030Sample Tray 406 x 406 x 50 mm482-5420Digital Pocket Thermometer -49.9˚C to +199.9˚C1Also required.79-0010200 mm dia Lid179-0020200 mm dia Receiver179-0070200 mm dia BS Sieve 63 Mic Stainless Steel Mesh179-0310200 mm dia BS Sieve 4 mm Stainless Steel Mesh179-1630200 mm dia BS Sieve 31.5 mm Perforated Plate179-1670200 mm dia BS Sieve 63 mm Perforated Plate1Particle Density & Water Absorption of Aggregate (Gas Jar Method)This test method is used for the determination of particle density and water absorption of aggregate between 40 mm and 5 mm.Standard(s)BS 812-2 Product CodeProductQty24-2830Gas Jar 75 mm dia x 300 mm with Glass Cover and Rubber Bung278-1320/01Drying Oven 220 ltr capacity, Fan-Circulated, complete with 4 Shelves and 1 Year Warranty178-6020/016 kg x 0.1 g Balance179-1515200 mm dia BS Sieve 5 mm Perforated Plate181-3060Sample Container 10 ltr capacity381-4700Stainless Steel Tray 305 mm dia2219Buyer’s GuideAggregatesParticle Density & Water Absorption of Aggregate (Pyknometer Method)This test method is used for the determination of particle density and water absorption of aggregate between 4 mm and 0.063 mm.Standard(s)EN 1097-6, BS 812-2 Product CodeProductQty24-2885Pyknometer complete with Non-Corrodable Cone and Rubber Seal 1 kg capacity242-1700Sand Absorption Cone142-1720Tamping Rod178-1320/01Drying Oven 220 ltr capacity, Fan-Circulated, complete with Shelves and 1 Year Warranty178-6020/016 kg x 0.1 g Balance179-0080200 mm dia BS Sieve 75 Mic Stainless Steel Mesh181-3060Sample Container, 10 ltr capacity381-3540Plastic Sample Container 10 cu Decimetre capacity complete with Lid suitable for CBR Soaking Test181-4700Stainless Steel Tray 305 mm dia282-2660Polythene Funnel 180 mm dia1Aggregate Abrasion Value using Los Angeles Abrasion MachineThis test method determines the resistance to fragmentation of coarse aggregate.The Los Angeles test method is the reference method and applies to natural or artificial aggregates used in civil engineering.Standard(s)EN 1097-2Product CodeProductQty42-5315/01Los Angeles Abrasion Machine meets ASTM and European Standards, 220-240 V AC, 50 Hz, 1ph142-5305/10Set of 12 Abrasive Charges (EN)178-1320/01Drying Oven 220 ltr capacity, Fan-Circulated, complete with 4 Shelves and 1 Year Warranty178-6040/0130 kg x 1 g Balance179-0010200 mm dia Lid179-0020200 mm dia Receiver179-0255200 mm dia ISO:565 3310/1 Sieve 1.6 mm Stainless Steel Mesh179-1555200 mm dia BS Sieve 10 mm Perforated Plate179-1565200 mm dia BS Sieve 12.5 mm Perforated Plate179-1575200 mm dia BS Sieve 14 mm Perforated Plate1www.ele.com • email: ele@eleint.co.uk • tel: +44 (0)1525 249 200Next >