< Previoustel: +44 (0)1525 249 200 • email: ele@eleint.co.uk • www.ele.com190Mixing, Moulding, Curing & StrengthCementADR Touch Control Pro 250/25 Cement Machine complete with Compression with Flexural Jigs & Platen Sets Product Codes: 39-7160/01, 39-7160/02, 39-7160/06SpecificationsProduct CodePower Supply39-7160/01220-240 V AC, 50 Hz, 1 ph39-7160/02110 V AC, 60 Hz, 1 ph39-6160/16220-240 V AC, 60 Hz, 1 ph250 kN frameOverall Dimensions L x W x H (mm)520 x 850 x 1255Max Vertical Clearance (mm)230Max Horizontal Clearance (mm)225Upper and Lower Platens150 mm diaMax Ram Travel (mm)15Related Power (W)1600Weight (kg)700Micro-processor Control SpecificationsMeasurement UnitskN, lbf or kgf - selectableAccuracyBetter than ±1% over calibrated rangeDisplay Backlit7 inch touch screenMax LoadHeld until resetOutputSerial RS 232C/USB/EthernetADR Touch Control Pro 250/25 Cement Machine Spares KitProduct CodeProduct39-7160/KSpares kit for ADR Touch Control Pro 250/25 Cement MachineProduct Standards:EN 196-1, EN 196-2, ISO 679, EN 459-2, EN 1015-11, EN 13454-2, ASTM C109/C109M, ISO 7500-1, ASTM E4The ADR Touch Control Pro 250/25 machine provides consistent automatic testing of a wide range of specimens. As standard the machine is supplied with platens fitted to the load frame, compression jig with 40 mm and 2.06 inch square platen sets and flexural jig for testing 40.1 x 40 x 160 mm prisms. The availability of the 25 kN low capacity load frame as standard extends the test capability of the machine for low strength compression or flexural testing. ±Rotatable high-resolution control display. ±Favourites option for test samples. ±On average 10% time savings per test sample. ±LAN connectivity for remote operation and diagnostics. ±Over 100 pre-programmed test profiles available. ±7 inch 800 x 480 TFT LED touch screen (IP31 rated). ±Connects to external PC. ±6 customised test profile favourite buttons for rapid testing. ±Stores over 1 million test results.www.ele.com • email: ele@eleint.co.uk • tel: +44 (0)1525 249 200191Mixing, Moulding, Curing & StrengthCementImpact Printer RS 232 Serial ConnectionProduct Code: 37-4859/01Supplied complete with serial RS232 communications cable and one paper roll.Spares/Consumables:Paper Roll 76 mm wide (Box of 20) (37-4859/12)Printer Ribbon(Black/Red) for use with Impact Printer (37-4859/10)Distance Pieces Full SetProduct Code: 39-6220Accessory for testing samples 40 mm, 50 mm, 70.7 mm and 100 mm.These items are required when testing above sample sizes NOT using the compression jig.Cement Testing AccessoriesFlexural Jig AssemblyProduct Code: 39-6160Comes as standard with 39-7160/01, 39-7160/02, 39-7160/06.Compression Jig AssemblyProduct Code: 39-5600Comes as standard with 39-7160/01, 39-7160/02, 39-7160/06.39-5600/10 = 40 mm Square Platens39-5600/11 = 2.06 inch Square Platens (also for use with 50 mm cubes)39-5600/13 = Aligning Block for 40 mm Square Platen39-5600/14 = Single Oversize Square Platen 2.06 inch ±5 litre nominal capacity. ±Microprocessor control. ±New mix program selector. ±Complies with latest EN Standards update. ±Choice of automatic mixing cycles. ±Sand and water dispenser supplied as standard.Automatic & Manual ModesDigital Mortar MixerMixing it upwith fullcontrolDesigned to mix mortars and cement pastes to the required industry Standards, the Digital Mortar Mixer has a planetary motion and is driven by a motor with a microprocessor based speed and program controller.Operated in either automatic or manual mode allowing complete control of the mixing. When used in manual mode, the two mixing speeds can be changed by means of a rocker switch, without switching off the motor. In automatic mode, any one of the pre-set mixing programs may be selected.Product Standards:EN 196-1 EN 196-3 ISO 679 EN 413-2 EN 459-2 EN 1744-1 EN 13279-2 EN 1015-2 EN 13395-1 EN 13454-2 BS 6463-103Contact the team now for further information: +44 (0)1525 249 200 • ele@eleint.co.uk193Buyer’s GuideCementAir Permeability Method (Blaine Method)The Air Permeability (Blaine) method measures the specific surface by comparison with a reference cement sample.The determination of the specific surface is to primarily check the consistency of the grinding process.Standard(s)EN 196-6, ASTM C204Product CodeProductQty24-290050 ml Density Bottle with Perforated Stopper638-0620Pure Mineral Oil 1 ltr Bottle138-0640NBS - Srm Reference Cement 10 g138-0650Filter Paper equivalent to Whatman No 40 12.7 mm dia. Box of 100138-1000Blaine Air Permeability Apparatus178-6000/01Electronic Top Loading Balance 200 g at 0.001 g. Dual Voltage 50-60 Hz181-0518Timer Clock182-5310Max-Min Thermometer (Mercury Free) Range -40.0˚C to +50.0˚C1Also requires Mercury not supplied by ELEDetermination of Density of CementThis test determines the density of cement by the displacement of a non-reactive liquid in a pyknometer.Standard(s)EN 196-6 Product CodeProductQty24-290050 ml Density Bottle with Perforated Stopper678-6000/01Electronic Top Loading Balance 200 g at 0.001 g. Dual Voltage 50-60 Hz181-0180Chattaway Spatula 125 mm181-0375Red Rubber Tubing H 6.5 mm Bore 5.0 mm Wall priced by metre282-2170Vacuum Desiccator 250 mm internal dia182-2180Safety Cage for Desiccator182-2660Polythene Funnel 200 mm dia182-7091Silica Gel 500 g pack, particle size 2.5-6.0 mm182-7700Filter Pump182-8500/0112 ltr Water Bath with Digital Controller LED Display 0 to 99.9˚C x 0.1˚C1Specific Gravity of Hydraulic CementThis test method determines the specific gravity of hydraulic cement and lime.Standard(s) EN 196-6, ASTM C188Product CodeProductQty38-1200Le Chatelier Flask EN 196-6 ASTM C188 complete with Calibration Certificate378-6000/01Electronic Top Loading Balance 200 g at 0.001 g. Dual Voltage 50-60 Hz181-0180Chattaway Spatula 125 mm182-8500/0112 ltr Water Bath with Digital Controller LED Display 0 to 99.9˚C x 0.1˚C1www.ele.com • email: ele@eleint.co.uk • tel: +44 (0)1525 249 200194Buyer’s GuideCementtel: +44 (0)1525 249 200 • email: ele@eleint.co.uk • www.ele.comStandard Consistence TestCement paste of standard consistence has a specified resistance to penetration by a standard plunger.Standard(s)EN 196-3Product CodeProductQty38-4010Vicat Frame Complete138-4010/10ASTM Initial Set Needle138-4010/13EN Initial and Final Set Needle138-2300Vicat Mould to EN 196 Part 3 complete with Glass Plate139-0035/01Automatic/Manual Mortar Mixer 5 ltr capacity supplied with Sand and Water Dispensers178-7090Harvard Trip Balance 2000 g capacity x 0.1 g with 225 g Additional Tare178-7110Weight Set for 78-7090181-0518Timer Clock181-0805Engineers’ Steel Rule 300 mm1Automatic Standard Consistence & Setting Time TestCement paste of standard consistence has a specified resistance to penetration by a standard plunger. The setting time is determined by measuring the penetration of a needle into cement paste of standard consistence until it reaches a specified value.Standard(s)EN 196-3Product CodeProductQty38-2015/01Digital Automatic Vicat Apparatus138-2015/12Needle Cleaning Device for 38-2015 Series Automatic Vicat Apparatus138-2015/15Mould Tank for use with 38-2015/01 Automatic Vicat for testing samples under water to EN 96-3139-0035/01Automatic/Manual Mortar Mixer 5 ltr capacity supplied with Sand and Water Dispensers178-7090Harvard Trip Balance 2000 g capacity x 0.1 g with 225 g Additional Tare178-7110Weight Set for 78-7090181-0518Timer Clock181-0805Engineers’ Steel Rule 300 mm1Part 4: General Expansion Test for Dry Hydrated LimeThis test method determines the expansion of dry hydrated lime.Standard(s)BS 6463Product CodeProductQty38-3005Le Chatelier Mould to EN 196-3 complete with Glass Plates and Counterweight338-3200Extensibility of Mould Apparatus138-3300Tamping Rod 17 mm dia138-3420/01Le Chatelier Water Bath complete with Timer. Complies with EN 196-3. 220-240 V AC, 50-60 Hz, 1 ph181-0335Trowel Gauging to BS:4550 approximately 175 mm long1Also required:39-0035/01Automatic/Manual Mortar Mixer 5 ltr capacity supplied with Sand and Water Dispensers139-1400/01Humidity Cabinet complete with Nebulizer and 5 Shelves1195Buyer’s GuideCementwww.ele.com • email: ele@eleint.co.uk • tel: +44 (0)1525 249 200Soundness of Cement PasteSoundness is determined by observing the volume expansion of cement paste of standard consistence as indicated by the relative movement of two needles.Standard(s)EN 196-3Product CodeProductQty38-3005Le Chatelier Mould to EN 196-3 complete with Glass Plates and Counterweight338-3205Extensibility of Mould Apparatus to EN 196-3138-3420/01Le Chatelier Water Bath complete with Timer. Complies with EN 196-3. 220-240 V AC, 50-60 Hz, 1 ph181-0335Trowel Gauging to BS:4550 approximately 175 mm long1Also required:39-0035/01Automatic/Manual Mortar Mixer 5 ltr capacity supplied with Sand and Water Dispensers139-1400/01Humidity Cabinet complete with Nebulizer and 5 Shelves 112 ltr1Heat of Hydration of Portland Cement This test method determines the heat of hydration of cements by means of solution calorimetry, also known as the solution method.The test is applicable to cements and hydraulic binders whatever their chemical composition and the heat of hydration is expressed in joules per gram of cement.Standard(s)EN 196-8, BS 4550-3 Product CodeProductQty23-3505Mortar and Pestle Porcelain138-4600/01Heat of Hydration Apparatus BS 4550. 220-240 V AC, 50 Hz, 1 ph178-5335/01Analytical Electronic Balance 220 g x 0.001 g with 100 mm dia Top-Loading Pan and Draught Shield178-7090Harvard Trip Balance 2000 g capacity x 0.1 g with 225 g Additional Tare178-7110Weight Set for 78-7090179-0020200 mm dia Receiver179-0110200 mm dia BS Sieve 125 Mic Stainless Steel Mesh179-0200200 mm dia BS Sieve 600 Mic Stainless Steel Mesh179-7210Sieve Brush Double-Ended Nylon181-0100Spatula 100 mm181-0518Timer Clock182-1540Weighing Bottle nominal size 30 mm dia x 50 mm height582-2100Non-Vacuum Desiccator 200 mm internal dia182-3320Porcelain Crucible 30 ml supplied with Lid82-7091Silica Gel 500 g pack, particle size 2.5-6.0 mm183-4140/01Muffle (Ashing) Furnace with Digital Control Pid. 1100˚C max temperature1196Buyer’s GuideCementtel: +44 (0)1525 249 200 • email: ele@eleint.co.uk • www.ele.comFlow of Mortars & Hydraulic CementTo perform this test method a sample is placed on a metal surface which is then raised and dropped through a known height.Standard(s)BS 4551, ASTM 230Product CodeProductQty38-6000BS/ASTM Flow Table Top (complete with tripod/baseplate)138-6020Tripod for Flow Table138-6040BS/ASTM Flow Mould138-6060Baseplate for Flow Table138-6080Calipers138-6100/01Motor Unit for use with 38-6000 220-240 V AC, 50-60 Hz, 1 ph138-6160Plastic Tamper1Fineness of Fly Ash (PFA) by Wet SievingThis test method determines the fly ash fineness by wet sieving on a 45 micron sieve.Standard(s)EN 451-2, ASTM C115, C430Product CodeProductQty38-7600Spray Nozzle Apparatus for Wet Sieving of Fly Ash to EN 451 ASTM C115 C430138-7600/1245 Mic Sieve Stainless Steel Mesh 50 mm internal dia178-1215/01Drying Oven 50 ltr capacity 220-240 V AC, 50-60 Hz, 1 ph278-6000/01Electronic Top Loading 200 g at 0.001 g Balance3197Buyer’s GuideCementwww.ele.com • email: ele@eleint.co.uk • tel: +44 (0)1525 249 200Preparation and Testing of 40 x 40 x 160 mm Mortar PrismsThis test method determines the compressive strength and optionally the flexural strength of cement mortar.The test is used to assess whether the compressive strength is in conformity with its specification.Standard(s)EN196-1, 413-2, 459-2, BS 3892Product CodeProductQty24-9010Straight Edge 300 mm134-6575/01Large Curing Tank complete with Circulating Pump Heater/Thermostat Unit and Lower Rack139-0035/01Automatic/Manual Mortar Mixer 5 ltr capacity supplied with Sand and Water Dispensers139-1100Three Gang Mould for 40.1 x 40 x 160 mm Prisms complete with Glass Plate339-1120Feeding Hopper139-1130Scraper139-1150/01Jolting Table to EN 196-1 supplied without Moulds. 220-240 V AC, 50 Hz, 1 ph139-1170Standard Sand Graded Pack for Mortar Prisms to EN 196 (1350 g)1039-1400/01Humidity Cabinet complete with Nebulizer and 5 Shelves139-7160/01ADR Touch Control Pro 250/25 Cement Machine 220-240 V AC, 50 Hz, 1 ph178-6020/01Electronic Top Loading 6 kg x 0.1 g Balance179-0085200 mm dia Sieve 80 Mic Stainless Steel Mesh according to ISO 3310-1179-0125200 mm dia Sieve 160 Mic Stainless Steel Mesh according to ISO 3310-1179-0190200 mm dia BS Sieve 500 Mic Stainless Steel Mesh179-0230200 mm dia BS Sieve 1 mm Stainless Steel Mesh179-0255200 mm dia Iso: 565 3310/1 Sieve 1.6 mm Stainless Steel Mesh179-0270200 mm dia BS Sieve 2 mm Stainless Steel Mesh181-0518Timer Clock181-0705Wire Brush182-7341Mould Oil (25 ltr drum)1 ±Complies to BS EN ISO 17892-5 (BS 1377-5), ASTM D2435/ D2435M-11, ASTM D4546-08 and AASHTO 216 ±Automatic – reduces testing time. ±No compressor – stepper motor improves accuracy across entire 15 kN load range. ±Variable speed to suit sample type. ±Compact footprint. ±Multi language. ±7” waterproof, colour, graphical touchscreen. ±Compatible with latest DS8 software. ±Control up to 16 Auto Soil Consolidator machines from one PC. ±Ability to include manual Consolidation Frames. ±Can change target loads during a test. ±Save configurations for easy set-up of multiple cells and repeat tests. ±Wide range of sample cells. ±Flexible reports.AUTO Soils ConsolidatorSoilTest PRO RangeAchieve new levels ofFlexibility,Simplicity &Accuracy inConsolidationTestingContact the team now for further information: +44 (0)1525 249 200 • ele@eleint.co.uk199199www.ele.com • email: ele@eleint.co.uk • tel: +44 (0)1525 249 200199199CompactionAggregates TestingAggregates comprise a significant proportion of all materials used in the many different construction processes, so it is important to determine the properties of different types of aggregates through effective testing and measurement.The required properties will vary from project to project, for example, resistance to polishing will be unimportant in a pavement base course but will be crucial in a wearing course. However, the key criteria throughout are accurate and repeatable test procedures, and our range of aggregate testing equipment has therefore been designed to help determine a wide range of factors. These include: particle size, shape and texture; relative, bulk and compacted densities; soundness and resistance to chemical attack; and mechanical properties.AggregatesNext >